Download Print this page
Harley Benton MT100 Quick Start Manual

Harley Benton MT100 Quick Start Manual

Advertisement

Quick Links

MT100 Tuner
Safety instructions
Intended use
This device is used for the tuning of musical instruments. Any other use or use under
other operating conditions is considered to be improper and may result in personal
injury or property damage. No liability will be assumed for damages resulting from im-
proper use.
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are
not in the reach of babies and young children. Choking hazard! Ensure that
children do not detach any small parts (e.g. knobs or the like) from the
product. They could swallow small parts and choke!
Incorrect handling of lithium batteries can result in injury
• In the event of a short circuit, overheating or mechanical damage, lithium batteries
can cause severe injuries.
• Store devices with lithium batteries in a cool, dry place, away from heat sources, ide-
ally in the original packaging.
• Lithium batteries are hermetically sealed. Never attempt to open lithium batteries.
• Only use powder extinguishers or other suitable extinguishing agents to extinguish
a burning device containing lithium batteries.
Risk of fire due to incorrect polarity
Incorrectly inserted batteries may destroy the device or the batteries. Ensure that
proper polarity is observed when inserting batteries.
Features
• Clippable
• Big illuminated display, rotatable
• For chromatic tuning of guitars, basses and violins
• Built-in microphone and vibration sensor
• Calibration 430 - 450 Hz
• Tuning scales: C major, Bb major, Eb major, F major (in mode chromatic)
Technical specifications
Tuning modes:
chromatic,guitar, bass, violin
Tuning range
A0 (27.5 Hz) - C8 (4186 Hz)
Tuning accuracy:
± 1 cent
Reference tone range:
430 - 450 Hz
Tuning scales:
C major, Bb major, Eb major, F major (in mode chromatic)
Flat tuning:
1 - 4 semitones
Tone detection:
Vibration sensor, built-in microphone
Generated tones:
E1 (41.2 Hz) - A5 (880.00 Hz)
Tempo range metronome:
30 bpm - 250 bpm
Automatic shutdown:
after 3 minutes of inactivity
Battery type:
Button cell CR2032 (3V)
Dimensions (W × H × D):
60 mm × 33 mm × 22 mm
Weight:
41 g
Controls and functions
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de
Quick start guide
This quick start guide contains important instructions for the safe operation of the
unit. Read and follow all safety notes and all instructions. Keep the manual for future
reference. If you pass the device to another person, please pass the user manual with it.
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device.
Take batteries out of the device if it is not going to be used for a longer time period.
A) Where to use the product
Never use the product
• in direct sunlight
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty places
• at locations where the unit may become wet
• near magnetic fields
B) General handling
• To prevent damage, do not exert force on the device while operating the controls.
• Do not immerse the unit in water. Wipe only with a clean and dry cloth. Do not use liquid
cleaners such as benzene, thinners or flammable cleaning agents
C) Keep foreign substances from the unit!
Keep the device away containers with liquid. Should liquid fall into the unit, this could lead to
its destruction or fire. Be aware that no metallic parts come inside the device.
• Flat tuning with 4 semitones
• Tuning range from A0 (27.5 Hz) to C8 (4186.0 Hz)
• Tuner accuracy +/- 1 cent
• Metronome function from 30 bpm - 250 bpm
• Automatic shutdown
• Incl. battery (CR2032)
1
Power switch, Tuner (T), Metronome (M), Sound (S)
2
MODE button (M), BEAT button (B), NOTE button (downwards)
3
KEY button, tempo range (TEMPO, downwards)
4
VOLUME
5
CALIB (calibration button), tempo range (TEMPO, upwards)
6
LED
7
FLAT button (b), rhythm ( ), NOTE button (upwards)
8
VIB/MIC: Vibration sensor or microphone selecting switch
DocID: 116684_03.12.2020
EN

Advertisement

loading

Summary of Contents for Harley Benton MT100

  • Page 1 This quick start guide contains important instructions for the safe operation of the unit. Read and follow all safety notes and all instructions. Keep the manual for future reference. If you pass the device to another person, please pass the user manual with it. MT100 Tuner Safety instructions Intended use Possible damage by leaking batteries This device is used for the tuning of musical instruments.
  • Page 2 MT100 Tuner Operating the device ö pressed during 2 seconds to turn on the device. Press the Hold the power switch power switch again to select the operating mode Tuner (T), Metronome (M) or Tone generator (S). Hold the power switch pressed again during 2 seconds to turn off the device.