Find Chord Name When you play an elegant chord on guitar, but you don‘t know what name it is, Dr. Chord Pro can tell you easily with its memory of over 2,500 chords. Chromatic Tuner Dr.
CAUTION! z Do not open the casing for any reason as this may cause short circuit or malfunction of the product. z Do not apply excessive force to the product. In the event of the product suffering breakage, be careful not to hurt yourself with the broken pieces.
J OPERATING PROCEDURE z Press button q to turn on Dr. Chord Pro. The power will be turned off automatically 5 minutes later if the unit has been left unattended. Press this button again to turn the device off.
Page 5
C . 3. How to select a chord name: The Dr. Chord Pro contains 44 chord types for each of the twelve chord root. You can find your desired chord under its symbol.
Page 7
In the blank “OTHER SPELL”, different spells is separated with “,”. q When displaying chord type, “(“ and “)” does not appear. w When displaying chord type, “maj” displays as “MAJ”. e When displaying chord type, “add” displays as “Add” 4.
Page 8
(2) If the fret number is not 1fret and can not go back to 1 fret, Dr. Chord Pro will make the first doted fret the first line. In the above picture B-B, the left one is the chord position picture you set.
Page 9
4. Guitar Chord Name searching result display: Dr. Chord Pro will search in its memory the Chord name in ac- cordance with the chord position you set. If it can not find the related chord name, the LCD will display the information as the above picture A.
Page 10
Only the black parts are displayed for certain. of the music instrument closer to the Mic of Dr. Chord Pro to get best tuning result. When tuning with input jack, please plug the output plug of pickup in the input jack of Dr. Chord Pro.
Page 11
Flat tuning setting: Press button e and r to move flashing cursor to position FLAT in the above picture. Then press button y and u to select the flat setting you need. You can set standard mode ...
Page 12
3. Tempo setting: Press button e and r to move the cursor to the position TMP as in the above picture. Then press button y and u to adjust the tempo. Tempo range is from 30 to 250 BPM. If you keep button y or u pressed, you can increase or decrease tempo continuously with 1 Hz step.
Page 13
DC adaptor using instruction: You can use 9V, over 150mA DC adaptor as the power supply for Dr. Chord Pro. Plug the adaptor plug into position d. The positive and negative pole of adaptor must be z Using Stand When you want to put the unit on the table to get a better view effect, you can open the stand according to the above picture.