Table of Contents
Advertisement
Base Illustration
Line In
Reset
Button
Register
Button
Volume
key
Audio In
DC In
RJ11 for
Answering
machine
Intercom
Broadcast
key
key
Antenna
Receiver
Microphone
~21~
Base Features
Basic Base Station Features
1.
Antenna
a.
The antenna port has a reverse thread connector; to remove antenna or
cable, turn clockwise; to install, turn counterclockwise. Improper
installation may damage the connector
b. When using an outdoor antenna, locate the antenna (not the base station
itself) as high as possible for a clear transmission path.
2.
LED
a.
Power: it indicates base station has power.
b. In-Use: it indicates an active telephone line.
c.
Intercom: it indicates "Intercom" taking place.
d. Broadcast: it indicates "Broadcast" taking place.
3.
Reset Button
a.
Restores base station to factory settings
b. Reset button is indented to prevent accidental system reset.
c.
All handsets (including administrator) and additional base(s) need to be re-
registered after a base station reset.
4.
Registration Key (REG)
Enters registration mode along with handset, assigns handset ID (10-90).
5.
Line
Standard RJ-11C/CA-11A connector to plug in the telephone line
6.
Telephone:
Another RJ-11C to plug in the optional answering machine
7.
Audio-in Jack (3.5mm)
8.
DC In: to plug in the power adaptor
9
Voice Volume
~22~
Advertisement
Table of Contents
