Step 3:
Removing of the screws from the distance piece
Remove the four pre-assembled screws from the distance piece.
Step 4:
Inserting of the distance piece
1.
Place the distance piece between the rails.
2.
If necessary, pull the rails slightly apart to fit the distance piece into the pre-drilled holes.
Step 5:
Assembly of the distance piece
Attach the distance piece to the wooden rails with the Allen key, using the 4 pre-assembled screws
previously removed in step 3.
Schritt 6:
Tightening of the screws
Tighten all screws.
13