Cleaning & Storage - PowerXL ST-006 Owner's Manual

Cleaning & Storage
Clean the appliance after each use. The Basket and
the Fry Tray are coated with a special nonstick
surface. Never use abrasive cleaning materials or
utensils on these surfaces.
1. Remove the Power Cable from the wall socket
and be certain the appliance is thoroughly
cooled before cleaning.
2. Wipe the outside of the appliance with a warm,
moist cloth and mild detergent.
3. Clean the Basket and the Fry Tray with hot water,
a mild detergent, and a nonabrasive sponge.
NOTE: The Fry Tray is dishwasher safe.
TIP: Should the Fry Tray contain difficult-to-
remove food particles, soak in hot, soapy water
for 10 mins.
NOTE: The rubber bumpers on the Fry Tray are
part of the Fry Tray and should generally not
be removed. However, if the rubber bumpers
Self-Cleaning
Use the self-cleaning function to clean limescale out
of the Water Tank after about 20 hours of use
(NOTE: If the appliance is not used often, the self-
cleaning function should be used after each cooking
process). To use the self-cleaning function:
1. Add about ½ ounce (14.5 ml) of vinegar to
2 cups (500 ml) of water and stir until the citric
acid is dissolved.
2. Add the mixture to the Water Tank. Place
the Water Tank on the appliance.
Storage
1. Unplug the appliance and let it cool down thoroughly.
2. Make sure all components are clean and dry.
3. Place the appliance in a clean, dry place.
18
PowerXL Steam Air Fryer™
need to be cleaned, they can be removed and
reattached: To remove the rubber bumpers,
locate the capped end of the bumpers and
push the capped end off of the Fry Tray. There
will be some resistance, but keep pushing until
the rubber bumpers come off of the Fry Tray.
Take note of the slot on which the bumpers
were sitting. To reattach the rubber bumpers,
align the hole in the rubber bumpers with the
slots from which the rubber bumpers were
removed. Slide the rubber bumpers all the way
back onto the slot on the Fry Tray.
4. Clean the inside of the appliance with hot
water, a mild detergent, and a nonabrasive
sponge.
5. If necessary, remove unwanted food residue
from the heating element with a soft cleaning
brush.
3. Press the Clean Button on the Control Panel.
The machine will automatically enter self-
cleaning mode.
4. The appliance will automatically shut down
when the self-cleaning function is complete.
5. Rinse the system out to remove any odd taste
by filling the Water Tank with water. Then, press
the Clean Button on the Control Panel. Repeat
if necessary.