Farfalla GB-308 Manual page 10

1. Press once the ON-OFF button
2. Working:
Diffusion button
Light button
3. Press a second time the ON-OFF button
Blinking light: When the water level in the tank is too low or at zero, the diffuser stops automatically and a blue light will
flash around the function buttons. In that case, top the water up by following the « Precautions for use » steps to go back
to a normal working.
- GB-308 model
- Input power supply : AC 100-240V, 50-60Hz
- Output power supply : DC24V 630mA
- Consumption: 12.5W
This manual is also available from the after-sales service of your retailer.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was purchased. They can take this
product for environmentally safe recycling.
to turn the device on.
1) Press once to start the continuous diffusion.
2) Press a second time to start the cyclic diffusion. The device will operate for 30 seconds
and top for 30 seconds.
3) Press a third time to switch the diffusion off.
1) Press once to activate the colour changing ambient lighting.
2) Press a second time to fix the red colour.
3) Press a third time to fix the green colour.
4) Press a fourth time to fix the blue colour.
5) Press a fifth time to fix the yellow colour.
6) Press a sixth time to fix the turquoise colour.
7) Press a seventh time to fix the purple colour.
8) Press a eighth time to fix th white color.
9) Press a ninth time to swith the colour changing ambient lighting off.
to switch the device off.
WORKING
FEATURES
- Tank capacity : 300ml
- Dimensions : Ø 15 x H 19.1cm
- Recommended for a surface of : 30m²
9
Farfalla Essentials AG
CH-8610 Uster