Oster BLSTAB-CB0 User Manual page 9

Using the Food Modes
WARNING: Do not overfill the Blending Jar past the MAX fill line. Overfilling
1
may create a hazard and damage the blender.
1. (Optional) To vacuum blend, press the Vac + Blend (Auto) Button.
2. Turn the Seal Selector (Figure 7) on the Jar Lid to the appropriate selection:
(
(
3. Press one of the below buttons to select a pre-programmed setting:
Smoothie
Food Chop
4. When ready to begin, press the
Start/Stop button. The blender will
stop automatically when blending
is complete. Press the Start/Stop
button to cancel the program at
any time.
5. Press the Power button to turn
the blender off. This appliance
is pre-programmed to turn off
automatically if not used for a
period of several minutes. All
lights will turn off when the unit automatically powers down.
6. Press the Arm Release Button to lift the Arm Lock up on the FoodSaver™
Vacuum Arm (Figure 2).
7. Holding the handle, turn the Blending Jar counter-clockwise and then lift the
Blending Jar up and away from the Motor Base.
8. Push the Arm Lock on the FoodSaver™ Vacuum Arm down (Figure 6).
9. Push down on the Seal Selector to release the vacuum seal.
10. Turn the Seal Selector (Figure 7) on the Jar Lid to the rest selection (
take the Jar Lid off the Blending Jar.
Note: Pushing down on the Seal Selector or turning the Seal Selector away from the
vacuum selection (
Vacuuming without Blending
WARNING: Do not overfill the Blending Jar past the MAX fill line. Overfilling
may create a hazard and damage the blender.
1. Press the Vacuum (Storage) button.
2. Turn the Seal Selector (Figure 7) on the Jar Lid to the vacuum selection (
3. When ready to begin, press the Start/Stop button. The blender will stop
automatically when vacuuming is complete. Press the Start/Stop button to
cancel the program at any time.
4. Press the Power button to turn the blender off. This appliance is pre-
programmed to turn off automatically if not used for a period of several
minutes. All lights will turn off when the unit automatically powers down.
5. Press the Arm Release Button to lift the Arm Lock up on the FoodSaver™
Vacuum Arm (Figure 2).
6. Holding the handle, turn the Blending Jar counter-clockwise and then lift the
Blending Jar up and away from the Motor Base.
7. Push the Arm Lock on the FoodSaver™ Vacuum Arm down (Figure 6).
8. Push down on the Seal Selector to release the vacuum seal.
BLSTAB-CB0_19ESM2 (US).indd 9
) Blending Only
) Vacuum Blending
) introduces air to your drink/meal.
9
Figure 7
Vacuum Blending
Blending Only
Rest
) to
5/24/19 9:46 AM
).