Bluetooth Connection; Bluetooth Operation; Fm Radio Operation; Fm Radio Memory - i-box Dawn Manual

Bluetooth connecting & disconnecting
1. Press (8) to cycle through the modes until you get to Bluetooth mode.
2. Once in Bluetooth mode the display will flash while searching for the last
connected device.
3. If the most recent connected device can not be found, the i-box Dawn will
search for previous devices.
4. Select i-box Dawn from the Bluetooth list on your device to start pairing.
5. Once pairing is successful, the Bluetooth display will stop flashing and a beep will
sound.
6. Press / (3) for 3 seconds to disconnect your device from the i-box Dawn.
A beep will sound to confirm the device has been disconnected successfully.
The i-box Dawn will now be in pairing mode again, allowing you to pair a new
device.
7. Long press (8) to return to clock mode when you are finished.
Bluetooth play operation
• Press +/- (6/7) to increase or decrease the volume level (0-15).
• Press (2) to play the previous song or press
• Press / (3) to play or pause the song.

FM radio operation

1. Press (8) to cycle through the modes until you get to FM radio mode.
2. Press (2) or
3. Press and hold
4. Press +/- (6/7) to increase or decrease the volume level.
5. Long press (8) to return to clock mode when you are finished.

FM radio memory

There are 10 preset spaces available for you to store your favourite stations.
1. Press (2) or
2. Press and hold
3. Press (2) or
4. Press / (3) once you have selected the preset space for your chosen FM.
station to save the preset.
5. Press / (3) to access the stored presets.
6. To access your saved preset, press
preset then wait 5 seconds for the FM station to start playing.
www.iboxstyle.com
(4) to change the FM station.
(2) or (4) to search for the next FM station automatically.
(4) to select the FM station you would like to store.
/ (3) to bring up the preset menu.
(4) to cycle through the 10 preset spaces available.
(4) to select the next song.
(2) or (4) until you get to your chosen
Dawn | 08