Powering Your Glow; Setting The Time; Bluetooth Pairing - i-box Glow Manual

Bedside alarm clock with bluetooth, wireless charging & nightlight
Hide thumbs Also See for Glow:
Table of Contents

Advertisement

Powering your Glow alarm clock
The Glow is powered by the AC/DC power adaptor supplied. Plug the adaptor into a
mains socket and then connect to the DC power socket (15) on the back of the Glow.
The Glow will switch on automatically in clock/standby mode and the LCD will light up.
Battery backup
In addition to the DC In power supply you can fit 2 x AA batteries (not supplied) in the
battery compartment (16) to provide a backup power supply. If the mains supply is
disconnected or interrupted the power supply is automatically switched to the backup
battery, so that the time and alarm settings are not lost. Please Note: speaker, radio
and charging functions will not operate when the Glow is powered solely by the back-
up batteries. When fitting the batteries make sure their polarity matches the markings
in the battery compartment.

Setting the time

1. Plug in the AC/DC power adaptor supplied, the default time 0:00 will appear in
the LCD display (5).
2. Long press the clock
(4) keys to switch between 24hr and 12hr clock setting.
3. Then press the
clock key (3) again to set the hour use the
to change the hour.
4. Press the
clock key (3) to set the minutes use the
change the minutes.
5. Press the
clock key (3) again to confirm the time set.
To reset the clock, long press the
steps 2-5 above.

Bluetooth pairing

1. Press the
mode key (1) twice to enter Bluetooth pairing mode. "bt" will appear in
the display and also the Bluetooth symbol which will flash.
2. Place the device you want to pair with your Glow within 1m of it, enter your
device's Bluetooth menu and select "i-box Glow" in the device list. When your
Glow and device are paired, you will hear a chime and the Bluetooth symbol which
will stop flashing.
Once paired with a device the Glow will reconnect automatically when switched to
Bluetooth mode if the paired device is within range.
07 | Glow
key (3), the LCD will display "24hr" press the
mode key (1) to enter standby mode then follow
(2) or
(2) or
(4) keys
(2) or
(4) keys to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents