Table of Contents
Advertisement
3 General Operation
3.1 Using the Control
3.1.1 Item
3.1.2 Adjust
IM-HC 561174 1120 Basic Heating Control
The Basic Heating Control uses a Liquid Crystal Display (LCD) as the
method of supplying information. You use the LCD in order to set up and
monitor the operation of your system. The Basic Heating Control has
three push buttons (Item, ,
you program your control, record your Adjust Menu settings for future
reference or troubleshooting.
The abbreviated name of the selected item will be displayed in the item
field of the display. To view the next available item, press and release the
Item button. Once you have reached the last available item, pressing and
releasing the Item button will return the display to the first item.
To make an adjustment to a setting in the control, press and hold
simultaneously for one second, the Item,
will then show the word ADJUST in the top right corner. Then select the
desired item using the Item button. Finally, use the
make the adjustment.
To exit the adjust menu, the control must be left alone for 20 seconds.
When the Item button is pressed and held in the VIEW menu, the control
scrolls through all the control adjust items in both access levels.
Additional information can be gained by observing the Status Field and
Pointers of the LCD. The Status Field will indicate which of the control's
outputs are currently active. Most symbols in the status field are only
visible when the VIEW menu is selected.
) for selecting and adjusting settings. As
and
buttons. The display
and/or
General Operation
button to
7 of 36
Advertisement
Table of Contents
