Cadco BAKERLUX Quick Manual

BAKERLUX
MANUAL OPERATION
1
Press POWER button to turn on oven & activate control panel.
Press MANUAL COOKING CYCLE icon to bring up
2
Parameter Settings Screen.
Press TIMER icon. It will turn red. This will allow you to set
3
cooking time for STEP 1 of your program.
Set TIMER by pressing
4
desired time appears.
(For continuous run, press
5
Press TEMPERATURE icon. It will turn red.
Set COOKING TEMPERATURE by pressing
6
the slider bar, until desired temperature appears.
(Optional - for humidity; otherwise skip to 10.)
7
Press HUMIDITY icon. It will turn blue.
Set HUMIDITY by pressing
8
appears (from “oFF” to “100% in 20% increments.)
Set fan speed by pressing FAN SPEED icon. It will turn
9
red. Press / to set 1 (low) or 2 (high).
(Optional - for PREHEAT; otherwise skip to 13.)
10
Press icon to add
PREHEAT TEMPERATURE.
Press TEMPERATURE
Set PREHEAT TEMPERATURE by pressing
11
the slider bar until desired temperature appears.
12
Press icon to return to parameter setting screen.
(Optional - for adding up to 8 additional steps to cooking cycle;
otherwise skip to 14 OR 15.)
Press icon to pass STEP 1 and access parameters
13
settings for STEP 2. Follow directions 3 - 9 above as applicable.
Repeat for each additional step desired.
To start the cooking cycle without saving the program for another
14
occasion, press START / STOP icon. (If preheating, wait until INSERT
TRAY screen appears before putting food in oven.)
OR
To SAVE the program before starting the cooking cycle, continue
15
with PROGRAM RECIPES (see 2 above right.)
TOUCH
TM
/ , or use the slider bar until
until INF appears on LED screen.)
/ , or use
or until desired humidity %
icon. It will turn red.
/ , or use
See instruction manual for additional options & information
OVENS QUICK START GUIDE
PROGRAMMING/ SAVING
If starting from scratch, press POWER button to turn on oven &
1
activate control board. Then follow MANUAL OPERATION 2-13
at left. If continuing from MANUAL OPERATION 15, see 2 below.
2
Press the MODIFY icon.
3
Press the "_ _ _ _ _ _" field.
Set a NAME for the program by typing it on the KEYPAD and
4
then pressing OK.
Press the PROG PICTURE icon, then choose a photo to go with
5
the program.
6
Press the SAVE icon to save the program.
To immediately start cooking with the new saved program, press
7
START / STOP icon.
If program includes preheating, wait until INSERT TRAYS screen
8
appears before placing food in oven.
STARTING A SAVED PROGRAM
Press PROGRAMS icon. Scroll through saved programs by pressing
1
/ until desired program appears. Press the desired program.
2
Press START / STOP icon to start program.
If program includes preheating, wait until INSERT TRAYS screen
3
appears before placing food in oven.
CONTINUOUS RUN SETTING
1
Press TIMER icon until 000 is on the screen..
2
Press icon until INF appears on the LED screen.
3
Press START / STOP icon.
START
STOP
STOP A PROGRAM IN PROGRESS
Press and hold START / STOP icon for 2-3 seconds.
_ _ _ _ _ _
OK
START
STOP
INSERT TRAYS
START
STOP
INSERT TRAYS
START
STOP
START
STOP
8/7/2019 RV02