Advertisement
Lumination
LDXB Series
®
Unit Installation
1
Cut the appropriate size hole into
ceiling tile (see table at right).
2
Slide hanger bars through
adjustable mounting brackets.
Hanger bars must be ordered
separately.
4
Adjust fixture height to be flush with
ceiling and secure by tightening
both adjustable mounting bracket
wingnuts.
NOTE: Refer to step 7 for trimless
installation
Fixture
4 in. round fixture
See Note
6 in. round fixture
4 in. square fixture
6 in. square fixture
NOTE: The maximum ceiling thickness is 1
3
Option A: Mounting fixture by attaching hanger bars to T-Grid ceiling.
Option B: Mounting fixture with
5
Slide reflector into the fixture.
Verify reflector trim is flush with
ceiling. Repeat step 4 if trim is not
flush.
For wall wash reflectors, position
reflector so that light is directed
towards wall.
Option A
T-Grid
" EMT conduit. Supplied by 3
1/2
2
Installation Guide
Hole Size
5 in. (126mm) diameter hole
6
in. (165mm) diameter hole
1/2
5
in. x 5
in. (140mm x 140mm)
1/2
1/2
7 in. x 7 in. (178mm x 178mm)
in. (32mm).
1/4
Option B
party.
rd
T-Grid
Advertisement
