Monster Pusat User Manual page 13

PC connection/pair Settings:
1. Receiver insert to the PC usb port.
2. When the controller LED is turned o .
3. Quickly down the Home button twice, 4 channel LEDS lights ash.
4. When channel LED1+LED2 stay on, connection is successful.
5. Enjoy your game on your devices
Channel LED:
1. If controller is not paired, when charging channel 4 LED ashing, fully
charged all channel LED turn o .
2. If controller is paired, when charging LED ashing, fully charged
connected channel LED(s) stay on. And when the battery voltage is
lower than 3.4V, connected channel LED(s)
ashing waring lower power, and close the vibration function.
Mode change and indicate:
1. Default mode is Xinput, LED1+LED2 will light.
2. Hold the "Home" button for 6 seconds, it turn to D-input mode
successfully, LED1+LED3 will light.
3. You can press the "HOME" button once to change to digital mode when
it is in Dinput mode, LED1+LED4 will light. In this mode the direction
key and left joystick swaps.
XINPUT
DINPUT (Simulation mode) DINPUT (Digital mode)