Monster Pusat User Manual page 11

PS3 connection/pair Settings:
1. Receiver insert to the PS3 console usb port.
2. When the controller LED is turned o .
3. Quickly down the Home button twice, 4 channel LEDS lights ash.
4. When channel LED stay on, connection is successful.
5. Enjoy your game on your devices
Channel LED:
1. If controller is not paired, when charging channel 4 LED ashing, fully
charged all channel LED turn o .
2. If controller is paired, when charging LED ashing, fully charged
connected channel LED(s) stay on. And when the battery voltage is
lower than 3.4V, connected channel LED(s)
ashing waring lower power, and close the vibration function.
Channel indicate:
The PS3 can connect 7 controller:
The rst controller: LED1 is normally on.
The second controller: LED2 is normally on.
The third controller: LED3 is normally on.
The fourth controller: LED4 is normally on.
The fth controller: LED1+LED4 is normally on.
The sixth controller: LED2+LED4 is normally on.
The seventh controller: LED3+LED4 is normally on..