Pivot CHRONOSTEP User Manual

USER'S MANUAL
Thank you for purchasing this PIVOT product.
Please read this manual carefully and keep it for future
reference.
I f t h i s p r o d u c t i s g i v e n t o
Product
another user, make sure to
include this User's Manual.
Contents
Contents / WARNING / CAUTION .................. 1
Features...................................................... 1
Part Names and Displays .............................. 1
Connecting The Wires.................................... 2
Installing The Product .................................... 2
Settings ...................................................... 3
Basic Operation / Basic Flow of Operations ...... 4
Troubleshooting .......................................... 4
Improper use or disregard of these warnings
WARNING
may result in the injury or death of people.
• Do not work in areas where
there is excessive exhaust.
Due to vehicle exhaust emission
poisoning or fire may result in a
damage to humans.
• Do not crush the cable.
Please be careful that the cable
does not get crushed by the seat
rail or car door steel plate, nor cut
by any sharp steel plate as this may
c au s e a p o o r c o n n e c t i o n o r a n
electric short leading to fire or other
danger.
Features
Chronometric Display + Stepping Motor = Perfection
From the 1920s to the 1960s racing cars around the world used a
chronometric tachometer. We have reproduced that sleek styling
with a modern stepping motor to bring you a tachometer that can
easily switch to real display.
Chronometric Display
To the clock-like design of yesteryear we have added a stepping motor that
allows for a peak hold of about 0.5 seconds.
Switch display between Cronometric and Real Display
Engine rotation display can change easily between Chrono metric and
real-time display.
Nostalgic Design
Reprint the nostalgic design of the 1960s.
Sequential Shift Lamp
Includes an easy-to-read shift lamp that comes on 1000 rpm before the set
shift point. .
Compatible with wide range
Compatible with any 12V 1 to 8 cylinder gasoline models and some diesel
models as well.
Translucent Illumination
The translucent LED system provides a clear display of dial and needle even
at night.
Peak Value Display
This enables easy viewing of RPM peak value after engine start.
Opening Demo
When the key is turned ON the needle will move to the extreme left several times for
searching position. Then it will move to the maximum value and finally to reading for
current measurement item.
Product Number :
( )
CSG
＋
Please check the contents of the package
Meter
Cushion
Tape
• Do not operate while driving.
Operating or checking the display
during driving may cause an accident;
please use with the utmost consider-
ation for safety.
• Please se cur ely fasten the
product to a stable place and
be sure to store bundle away
all wires with tape, etc...
It is very dangerous to pull tangled
wires by force or allow tangled wires
to interfere with driving.
5-pin Power Cable White Extension
with fuse 3A Cord
Cut Connectors Zip Ties
× 4
Improper use or disregard of these warnings may cause
CAUTION
injury to persons, damage the product and other things.
• This product is for DC12V cars;
Installation cannot be carried out on cars with
other voltage batteries.
• Just after installation do not exert any
strong force on the product.
When double-sided tape is used for an installa-
tion be warned that when hot the tape tempo-
rarily losses adhesiveness.
• Do Not Use Chemical Cleansers.
If the unit gets dir ty please wipe with a soft
cloth to remove any dirt. Do not use chemical
cleansers such as thinner, benzene, or alcohol.
Shift Lamp
(Setting range; 3000–9000 rpm, 200 rpm unit)
Shows the peak reading after the engine begins running In order to prevent
over-revving while shifting, an F-1 sequential type shift has been included,
which shows a green lamp 1000 rpm before the set engine rpm and a red lamp
at the shift point.
Normal
All Lamps OFF The lamp in the middle
lights up in green.
Part Names and Displays
1
Switch
Use to change modes and/or
settings.
2
Shift Lamp (LED)
Blinks at the set rpm.
3
Needle
Show the current values.
4
Illumination
(night illumination)
Normally illuminated when on
display.
(CSG As of February, 2021 No.2)
CHRONOSTEP
STEPPING GAUGE
ø80
TACHO METER
Double-sided Adjustable
Tape × 2 Stand
User's Manual Wiring Chart
(This Book) (In Japanese)
• Do not install the product in any
place subject to high temperature
or any place where water may be
splashed.
• Make sure to replace all screws and
parts to their original place.
• Do not install the product in a place
where it will cause distraction.
• Do not , in any manner, process,
take apart, or make changes to this
product.
1000rpm before Shift Point
The lamps to the left
and right blink red.
7
8
6
9
5
4
RPM x 1000
0
STEPPING DRIVE
3
1
2
Allen
Wrench
2
1
3
1