Sony ERS-7M3 User Guide Entertainment Version User Manual page 17

2
®
Select the AIBO Entertainment Robot to control.
z
Hints
• If the desired AIBO robot is not shown in the list, or if it is not found when using "Find" in Windows XP, check whether Universal Plug & Play is
installed, and if the setting to block UPnP framework is enabled in the Windows Firewall. For details on correct settings for communicating with the
AIBO robot via a wireless LAN, see the "User's Guide (PC·Network)" for the AIBO robot ERS-7M3 (PDF).
• For details on setting items, see the section "Network Settings" (page 79).
• If you don't know the IP address of the AIBO robot, you can check it using the Clinic mode. For details, see "User's Guide (PC/Network)" (PDF).
1 Select this option.
If the AIBO robot that you want to connect to has a fixed IP
address or select "Manually set IP address" and enter the IP
address in the "AIBO's IP Address" field.
2 Click this button.
The software searches for all AIBO robots present on the same
network as the PC.
Only AIBO robots for which "Enable SSDP" in AIBO WLAN
Manager 3 is selected are listed.
3 Click and select the desired AIBO robot from the list when
the search is complete.
4 Click this button to connect to the AIBO robot.
5 If password information has been set in AIBO WLAN Manager
3, enter the required "User ID" and "Password", and select the
"Send Password Automatically" check box.
6 When the AIBO robot has been selected, click this button.
17