Declaration Of Conformity - Worx Professional WU820 Original Instructions Manual

PLUG REPLACEMENT
( UK & IRELAND ONLY )
If you need to replace the fitted plug then follow
the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
BLUE =NEUTRAL
Brown = Live
As the colors of the wires in the mains lead
of this appliance may not correspond with the
colored markings identifying the terminals in
your plug, proceed as follows. The wire which is
colored blue must be connected to the terminal
which is marked with N. The wire which is
colored brown must be connected to the terminal
which is marked with L.
WARNING! Never connect live or neutral wires
to the earth terminal of the plug. Only fit an
approved 13ABS1363/A plug and the correct
rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed to
prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
12
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description WORX Angle Grinder
Type WU820 WU830 (820, 830- designation of
machinery, representative of angle grinder)
Function Peripheral and lateral grinding
Complies with the following Directives,
2006/42/EC, 2004/108/EC, 2011/65/EU
Standards conform to
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
EN 60745-1
EN 60745-2-3
The person authorized to compile the technical
file,
Name: Russell Nicholson
Address: Positec Power Tools (Europe)Ltd, PO
Box 152,Leeds,LS10 9DS,UK
Suzhou 2015/04/16
Allen Ding
Deputy Chief Engineer,Testing & Certification