Advertisement
Elastic-powered Turtle : Assembly Instructions
Attach the wheels
After turning the turtle's body over,
glue the tummy to it.
Attach.
Feed the band stopper through the hole
at the front of the body to the outside.
Be careful that the band doesn't come undone.
Assemble together
Fold along the fold lines
and glue together
at the reverse side.
Glue
Attach.
Attach the turtle's head and tail
to the completed body, and you're done!
Being careful not to mix up the front and back wheels,
put the axles into the grooves on the body.
Check that the wheels spin smoothly.
When you have got the band stopper out,
glue it in place as shown in the diagram,
and wind the wheel band around the back wheels
(the tires furthest from the band stopper).
Advertisement
