Table of Contents
Advertisement
4
44
Press and hold down button 4
until the reading in display
area 2 has reset.
z
Multifunction display
Adjust the dimmer
Attempting to adjust the
dimmer while riding the
motorcycle can lead to accidents.
Do not attempt to adjust the
dimmer unless the motorcycle
is at a standstill.
Switch on the ignition.
Press button 1.
The current level of dimming
appears in display field 2.
Repeatedly press button 1 until
the desired dimming level ap-
pears on the display.
The brightness of the dis-
play increases one level each
time you press the button.
Each time you press the but-
ton after maximum brightness
is reached, brightness is re-
duced by one level.
Lights
Side light
The side lights switch on auto-
matically when the ignition is
switched on.
The side lights place
a strain on the battery.
Do not switch the ignition
on for longer than absolutely
necessary.
Low-beam headlight
The low-beam headlight switches
on automatically when you start
the engine.
When the engine is not
running you can switch on
the lights by switching on the ig-
nition and either switching on the
high-beam headlight or operating
the headlight flasher.
Advertisement
Table of Contents
