workshop, preferably an author-
8
ised BMW Motorrad dealer.
Roll the rear wheel into the
110
swinging arm, making sure that
the brake disc passes between
the brake pads.
z
Roll the rear wheel as far
forward as possible and loop
chain 8 over the sprocket.
Seat left adjusting plate 7 in
the swinging arm and install
quick-release axle 6 in the
brake caliper and the rear
wheel.
Make sure that the axle fits
into the recess of the adjust-
ing plate.
Install right adjusting plate 5.
Install nut 2, but do not tighten
it at this point.
OE
without centre stand
Remove the auxiliary stand.