Clamp of quick-release
axle
Tightening sequence:
Tighten alternately
19 Nm
Install axle screw 2 and tighten
to the specified tightening
torque.
Quick-release axle, front,
in axle holder
30 Nm
Tighten left axle clamping
screws 3 to the specified
tightening torque.
Clamp of quick-release
axle
Tightening sequence:
Tighten alternately
19 Nm
If fully tightened beforehand,
slacken right axle clamping
screws 1 again.
Remove the front-wheel stand.
OE
without centre stand
Remove the auxiliary stand.
Ease the right brake caliper
onto the brake disc.
Tighten screws 2 to the spe-
cified tightening torque.
Brake caliper on tele-
scopic fork
38 Nm
8
107
z