Behringer ULTRA-DI PRO DI4000 User Manual
  1. Manuals
  2. Brands
  3. Behringer Manuals
  4. Computer Hardware
  5. ULTRA-DI PRO DI4000
  6. User manual

Behringer ULTRA-DI PRO DI4000 User Manual

Hide thumbs Also See for ULTRA-DI PRO DI4000:
Table of Contents

Advertisement

Quick Links

Download this manual
User’s Manual
Version 1.1
June 2001
www.behringer.com

Advertisement

Table of Contents
loading

Related Manuals for Behringer ULTRA-DI PRO DI4000

Summary of Contents for Behringer ULTRA-DI PRO DI4000

  • Page 1 User’s Manual Version 1.1 June 2001 www.behringer.com...
  • Page 2 ULTRA-DI PRO DI4000 SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
  • Page 3 It is our philosophy to share our joy with you, because you are the most important member of the BEHRINGER family. With your highly competent suggestions for new products you’ve greatly contributed to shaping our company and making it successful.
  • Page 4 Professional 4-channel active Direct Inject Box s Professional and multi-purpose 4-channel Direct Inject box for stage and studio applications s Ultra-flat frequency response due to renowned BEHRINGER OT-1 transformers s Allows direct connection to speaker outputs for more than 3000 Watts...

  • Page 5: Table Of Contents

    ULTRA-DI PRO DI4000 TABLE OF CONTENTS 1. INTRODUCTION........................6 1.1 Before you begin ..........................7 1.2 Control elements ..........................7 2. APPLICATIONS ........................9 2.1 Tapping signal from a (bass)guitar ....................9 2.2 Converting the output of a keyboard / DJ-mixer / headphone plug ............ 9 2.3 Converting a microphone signal .....................

  • Page 6: Introduction

    High-quality components and design The philosophy behind BEHRINGER products guarantees a no-compromise circuit design and employs the best choice of components. The op-amps, type 4580, used in the ULTRA-DI PRO are chosen for their superior signal-to-noise ratio, low distortion and linear performance.

  • Page 7: Before You Begin

    Shipping claims must be made by the consignee. The BEHRINGER ULTRA-DI PRO fits into one standard 19" rack unit of space. Please allow at least an additional 4" (10 cm) depth for the connectors on the back panel.
  • Page 8 ULTRA-DI PRO DI4000 Fig. 1.2: Rear panel elements of the BEHRINGER ULTRA-DI PRO LINK. This is the unbalanced parallel output of the ULTRA-DI PRO. Connect this to the input of the backline or monitor amplifier. INPUT. Connect the source to this 1/4" jack to input the signal.

  • Page 9: Applications

    ULTRA-DI PRO DI4000 2. APPLICATIONS 2.1 Tapping signal from a (bass)guitar Fig. 2.1: Guitar ß DI box ß Guitar Amp/Mixer This figure shows the standard application of any Direct Inject box. The signal to the amplifier is unaffected, it is just tapped off to be routed to the microphone input of the mixer. Especially bass guitars benefit from this application.

  • Page 10: Converting A Microphone Signal

    3. INSTALLATION Your BEHRINGER ULTRA-DI PRO was carefully packed in the factory and the packaging was designed to protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage, which may have occurred in transit.

  • Page 11: Rack Mounting

    ULTRA-DI PRO DI4000 3.1 Rack mounting The BEHRINGER ULTRA-DI PRO fits into one standard 19" rack unit of space. Please allow at least an additional 4" depth for the connectors on the back panel. Be sure that there is enough air space around the unit for cooling and please do not place the ULTRA-DI PRO on high temperature devices such as power amplifiers etc.
  • Page 12 ULTRA-DI PRO DI4000 Output Cable Input Ground Pin 1 Shield (+) Signal + Hum Pin 2 = (+) Signal Positive (+)Hum + Signal (-) Signal + Hum Pin 3 = (-) Signal Negative (-)Hum + Signal 2 x Signal = Signal + 6 dB RFI and Hum Fig.

  • Page 13: Specifications

    3.5 kg BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

  • Page 14: Warranty

    (user included) will void the warranty. at its sole discretion, either repair or replace the product. 6. If an inspection of the product by BEHRINGER shows that the 2. If the warranty claim proves to be justified, the product will be defect in question is not covered by the warranty, the inspection returned to the user freight prepaid.

Table of Contents