Table of Contents
Advertisement
Quick Links
DOUBLE DELUXE SWING
I N ST R U C T I O N S
NOTE. Instructions not to scale.
CHAIN SET
• CHAIN SETS: (2)
Eye Bolts, nuts, and washers attached
SHORT
SHORT
CHAIN
CHAIN
FRONT
FRONT
LONG
LONG
CHAIN
CHAIN
FRONT
FRONT
5.5" EYE
5.5" EYE
BOLT
BOLT
4" EYE
4" EYE
BOLT
BOLT
NOTE. Add chains after
completeing assembly.
HARDWARE PACK
(4) 4.5" Barrel Bolts
(2) 4" Barrel Bolts
(7) 5" Hex Bolts
(8) 3.5" Hex Bolts
(1) Allen Wrench
(30) Washers
(15) Locknuts
SUGGESTED TOOLS
• Rubber Mallet
• Adjustable Wrench
ASSEMBLY
STEP 1. Align left arm with swing body. Insert 3.5" Hex Bolt through
washer, arm and swing body. Secure using washer and lock nut, repeat
this process for all 3 holes both left and right side.
NOTE. do not tighten bolts until Step 4.
(6) Barrel Nuts
(2) Tree Hooks and
chain sets
• Phillips Head Screwdriver
Lock Nut
3.5" Hex Bolt
Advertisement
Table of Contents
Related Manuals for Nags Head Hammocks Double deluxe swing
Summary of Contents for Nags Head Hammocks Double deluxe swing
- Page 1 DOUBLE DELUXE SWING HARDWARE PACK I N ST R U C T I O N S (4) 4.5” Barrel Bolts (2) 4” Barrel Bolts (7) 5” Hex Bolts (8) 3.5” Hex Bolts (6) Barrel Nuts (1) Allen Wrench (2) Tree Hooks and...
- Page 2 ASSEMBLY STEP 2. Position an upright as shown and secure it with (2) 3.5” Hex bolts STEP 4. Place the center table in the frame as shown, use (3) 5” Hex and a washer on each side of the material. Repeat for the other side. bolts, a washer on each side of the material and a lock nut to secure the front and rear legs to the center frame.
- Page 3 You can also brush the wood to help remove dirt. WARRANTY & RETURNS - Nags Head Hammocks products are guaranteed to be free of defects in both workmanship and material. Prolonged exposure to weather conditions including snow, rain, and humidity are not covered under the warranty, nor is damaged caused by normal wear, mildew, or improper care, including storage, maintenance, and assembly.
Need help?
Do you have a question about the Double deluxe swing and is the answer not in the manual?
Questions and answers