Advertisement
Control Assembly
Step 13. Add flat washer (20) over pivot screw, next add the adjustment lever (9) through square hole in tab on the gate
(2) and over pivot screw, secure with lock nut (19LN). NOTE: DO NOT OVER TIGHTEN, LEVER MUST BE ABLE TO
MOVE FREELY.
Step 14. Assemble the adjustment stop (12) to the calibration bracket (11) using bolt (21) through both pieces and into
the adjustment knob (13).
Step 15. Attach this assembly to the hopper, caging the lever (9). Use two bolts (21) with lock washer and nuts.
Step 16. Add plastic grip (10) to lever (9).
10
A LITTLE SOAPY WATER
WILL HELP GRIP SLIDE
ONTO THE LEVER.
9
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
11
13
12
18N
ADJUST LOCK NUT SO THAT
LEVER IS ABLE TO MOVE FREELY.
20
19LN
18LN
Page 9.
21
PIVOT SCREW
Advertisement
