Table of Contents
Advertisement
The passenger seat can be
heated at two levels. The second
level is used for fast heat-up of
the seat; then the switch should
be switched back to the first
level.
2 Switch in middle position:
Heating off.
3 Switch in one-dot position:
50 % heating output.
4 Switch in two-dot position:
100 % heating output.
Symbol 1 appears on the display,
indicating that the rear seat heat-
ing is ON.
If this warning symbol ap-
pears it tells you that the
onboard system voltage is low. If
applicable, the seat heating might
have been temporarily switched
off.
Adjusting the
instrument cluster
Adjusting the instrument
cluster
NOTICE
The instrument cluster may only
be adjusted when the motorcycle
is stationary.
Move instrument cluster 1 to
desired position by pressing
firmly on the top or bottom
edge. When doing so, make
sure to press in the center so
4
75
z
Advertisement
Table of Contents
