BMW F 800 GT 2015 Rider's Manual page 103

Install screws 1 with specified
torque.
Brake caliper on fork leg
22 lb/ft (30 Nm)
Insert wheel speed sensor in
bore and install screw 1.
Remove adhesive tape from
wheel rim.
Operate brakes several times
until brake pads contact brake
disk.
Removing rear wheel
Make sure ground is level and
firm and place motorcycle
on a suitable auxiliary stand.
BMW Motorrad recommends
the BMW Motorrad rear-wheel
stand.
Mount rear-wheel stands
( 104).
OE
with center stand
Make sure ground is level and
firm and place motorcycle on
center stand.
Shift into first gear.
Remove bolts 1 of rear wheel,
supporting the wheel as you do
so.
Roll rear wheel out toward rear.
8
101
z