Download Print this page
Sealey SCSG05 Instructions

Sealey SCSG05 Instructions

Premium pressure solvent sprayer with viton seals 1.5ltr

Advertisement

Quick Links

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
Wear eye
instruction
protection
manual
1. safety
warninG! Wear approved eye protection. Wear appropriate Personal Protective equipment. A full range of Personal Protective
equipment is available from your sealey dealer.
warninG! ensure that Health & safety, local Authority regulations and general workshop practice regulations are adhered to
when using sprayer.
Be aware of the safety requirements for the fluids contained in the vessel.
9
do read and follow all the fluid manufacturers instructions for application and safe use.
9
store the sprayer out of reach of children.
9
label vessel with chemical used, even if water. it is highly recommended that individual vessels should be used for individual
9
chemicals. cross contamination can give unexpected results.
Do not spray at people, animals, in high winds, or where there are sources of ignition.
8
Do not use the pressure sprayer for any purpose other than for which it is designed.
8
Do not use whilst eating, drinking, smoking; under the influence of drugs, alcohol, intoxicating medication, or if fatigued.
8
Do not leave the tank pressurised for long periods of time.
8
Do not expose the sprayer to direct sunlight.
8
Do not fill the container with liquids exceeding 30°c.
8
2. introDuCtion
Premium quality hand pump sprayer. ideal for use with some brake cleaners, detergents, traffic film removers, penetrating oils and weed killers.
Adjustable nozzle enables a mist to jet pattern, which allows for easy and direct application of liquid exactly where it is required. robust composite
construction with a 1.5ltr capacity container.
© Jack sealey limited
instructions for
premium pressure solvent sprayer
with viton seals 1.5ltr
model no:
Wear a mask
Original Language Version
sCsG05
scsG05 | issue 2 24/11/16

Advertisement

loading

Summary of Contents for Sealey SCSG05

  • Page 1 IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 Check that the nozzle and the filter at the end of the pick up hose is free of deposits and clean if necessary. 5.3. A kit of new seals for the sprayer is available from your sealey dealer quote part no. scsGPrK. environmental protection recycle unwanted materials instead of disposing of them as waste.