Advertisement
Pop-up Card ( Christmas-tree ) : Assembly Instructions
Turn assembly 2 over and stick on the back cover.
*Stick on from the inside in order to match up properly with the tree-shaped cutaway.
Line up the tree with the back sheet and add glue to the point circled in red only.
Use a paper punch to make holes in the tree assembly 4 at any spot you like.
If you don't have a paper punch, stick on the attached stickers.
Turn assembly 3 over, match up the tree assembly 5 with the tree shape on the base
card and add glue to the glue spot. Add glue to the other glue spot while folding.
Line up the corners of the two cover sheets and glue the sheets together so that
they are pinched between the glue spots.
Glue assembly 7 to the back of the left hand side of assembly 6, and you're done!
* Be careful to stick on the assembly facing the right way!
2
Canon
is a registered trademark of Canon Inc.
Advertisement
