Page 2
OBJECTIVE: Don’t get splashed and drenched by a juicy watermelon. THE WATERMELON: Start by inserting the rectangular bar into the side of the watermelon without the tank flap. You will hear a click sound once the rectangular bar is fully inserted inside the half of the watermelon. Clip on the two vine handles on each side of the watermelon.
Page 3
ASSEMBLY AND SETUP: Assemble the spinner by pushing the plastic arrow through the spinner card and snapping the arrow into the base. Open the watermelon tank using the tab at the top. Fill the tank with water(a) or with the Watermelon seeds(b) provided. Then, carefully close the tab.
Need help?
Do you have a question about the Watermelon Smash and is the answer not in the manual?
Questions and answers