Table of contents Important safety instructions Use of the equipment Introduction Box Content Connection Configuration Set up WiFi connection Configure SESAME in "Honoa" Licenses Operating mode ....Maintenance Resetting the device LED behaviour Note Regulatory Data EU Declaration of conformity...
Important safety instructions Disconnect the power supply whenever you proceed to the installation or repair of the equipment. In compliance with the European Low Voltage Directive, we inform you of the following requirements: •When the devices remain permanently connected, an easily accessible connecting device must be incorporated into the wir- ing.
Introduction Check door status and open or close it from anywhere in the world. A device for controlling the door of a residence from a smartphone. •Only compatible with VERSUS M8NF & KEEROLL control panels. •Supports up to 10 different users (licences). •Licences renewable every 5 years.
You may view device operation and installation videos www.jcm-tech.com/es/JCM/sesame-es/ Box Content Licenses: these are for registering users on the application mobile. Licenses are renewed every 5 years. If you need more licenses, please contact your distributor. jcmtechnologies...
Page 6
Connexion Connect the SESAME device to your M8NF or control panel or KEEROLL (RJ-45 connector). The "Status" LED should be blinking green, and the "Network" LED blinking red, to show that the device must be configured. jcmtechnologies...
Configuration Once properly connected, the equipment's settings must be adjus- ted. Set up WiFi connection On your mobile: Settings -> WiFi & Networks -> WiFi (search: SESAME_XXXXXXXXXX, does not require password). Configure the SESAME_XXXXXXXXXX connection: the settings website will automatically appear (if not, go to 192.168.4.1 on your browser).
If you do not have "Honoa" on your mobile, download the applic- ation. You must login to enter the app. If you do not have an account, please register. Within the application, press "NEWDEVICE." Scan the QR code from the SESAME device or enter "ACTIVATION KEY." jcmtechnologies...
Complete the information in the fields "Device" (e.g., Sesame), "Place" (e.g., Garage house), and "City" (e.g., Barcelona), and press "SAVE." The device has now been added to the application. Licenses Once the device has been added to the "Honoa" application, you must enter a license to be able to use it.
Page 10
Press on "GARAGE HOUSE" (Place) and, on the SESAME device, on "LICENSE." Scan the license's QR code or manually input the code. Press "SAVE." jcmtechnologies...
Resetting the device Reset the device if changing the Wi-Fi network or your Wi-Fi pass- word. To reset SESAME, press the WPS/ RESET button for 10 seconds, with the device connected. The LED “Status” will be set to green, and “Network" and "Internet" to flashing red. Stop press- ing the button when "Internet"...
LED behaviour FIXED BLINKING Status Network Internet State Action Power off Starting WAIT Use embed- ded web or Wi-Fi Con- WPS to con- figuring figure con- nectivity Wi-Fi Con- REBOOT figuring timeout DEVICE Connecting Wi- WAIT WRONG WI- PASSWORD Wi-Fi Error CHECK ROUTER (WI-FI)
Regulatory Data EU Declaration of conformity The manufacturer JCM TECHNOLOGIES, S.A. declares that the product SESAME complies with the relevant fundamental require- ments of the RED Directive 2014/53/EU and of the RoHS Directive 2011/65/EU. See website https://www.jcm-tech.com/declarations/ JCM TECHNOLOGIES, SA...