VTech Peppa Pig Learning Watch Parents' Manual page 12

If for some reason the unit stops working or malfunctions, please follow
these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the battery.
3. Let the unit stand for a few minutes, then replace the battery.
4. Turn the unit back On. The unit should now be ready to use again.
5. If the unit still does not work, install with a new battery.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services Department at
1-800-521-2010 in the U.S., 1-877- 352-8697 in Canada, or by going to our
website vtechkids.com and filling out our Contact Us form located under
the Customer Support link. Creating and developing VTech products is
accompanied by a responsibility that we take very seriously. We make every
effort to ensure the accuracy of the information, which forms the value of
our products. However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage you to contact us
with any problems and/or suggestions you might have. A service representative
will be happy to help you.
NOT E
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
12 12
12