Advertisement
INSTALLATION
1. Using the key or thumbturn set the
cam in the centre of the cylinder body.
Do not use force.
2. Insert the cylinder into the lock case
making sure it is horizontal and at 90˚ to
the door face before fully tightening the
escutcheon/backplate fixings.
90˚
3. DO NOT FORCE the cylinder into
place as this will damage the cylinder
and lockcase and invalidate the
warranty.
3mm Max.
The cylinder may project a Max. 3mm
from the face of the door furniture.
4. Tighten the cylinder retaining screw.
DO NOT USE POWER TOOLS.
5. Check cylinder operation both
sides by using the key/thumbturn (as
appropriate).
6. Ensure the door latches correctly
and that the deadbolt (if appropriate)
throws smoothly into the keeper.
Adjust strike plates accordingly.
OPERATION
Make sure the key is inserted fully into
the cylinder before turning. DO NOT
use force to turn the key.
DO NOT use the key bow to pull the
door open or closed.
For our unrestricted cylinder ranges
where keyblanks are available; It is
likely that non genuine key blanks and
in particular those that are shorter, will
operate the cylinder intermittently.
Please use only GENUINE Tigris™ keys.
To order additional keys please visit
www.access2.com
C o p
y
G e n
u i n e
DO NOT insert objects to increase the
torque on the key bow.
DO NOT FORCE the thumbturn or key
with a device to increase leverage e.g
mole grips.
Advertisement
