5
Detach the lens (page 20).
6
Use the blower brush to clean the
image sensor surface and the
surrounding area.
• Do not touch the image sensor with the
tip of the brush. Complete the cleaning
quickly.
• Hold the camera's face downward to
prevent the dust from resettling in the
camera.
• When cleaning the image sensor, do not
put the tip of a blower brush into the
cavity beyond the lens mount.
7
Attach the lens and set the POWER switch to OFF.
Note
• The camera starts beeping if the battery pack becomes low during cleaning. Stop the
cleaning immediately and set the POWER switch to OFF.
33
Need help?
Do you have a question about the DSLR-A200 Instruction Manual (DSLR-A200) and is the answer not in the manual?