Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SDC TCC Series
Summary of Contents for SDC TCC Series
- Page 1 TCC/RCC Series Modular Consoles Any su ggestio ns or comme nts to this instruction or prod uct are welco me . P lease con tact us thr ough P:\INST-INS TRUCTIONS\CO NTROL CONSOLES \INST-TCC/RCC REV D 10/20 Page 1 our website o r email eng ineer@sdcsecurity.com...
- Page 2 Intentionally left blank P:\INST-INS TRUCTIONS\CO NTROL CONSOLES \INST-TCC/RCC REV - 10/20 Page 2...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Product Description Product Features Product Specifications Rocker Switch Types (All outputs are dry outputs) Switch Panel Connector Boards 2.1.1 Rocker Switch Outputs 2.1.2 Reset Button/Key Lock Switch Output 2.1.3 LED/Alarm Power 2.1.4 Control Inputs Direct Connection to Locking Devices with 2-State Status LED (Door Closed) (for AL or BL Series Panels) Direct Connection to Locking Devices with 3-State Status LED... - Page 4 Intentionally left blank P:\INST-INS TRUCTIONS\CO NTROL CONSOLES \INST-TCC/RCC REV - 10/20 Page 4...
-
Page 5: Product Description
The consoles can be directly wired to locking devices, or they can be connected via door relay modules such as SDC UR-1 or UR4-8. When used in with a UR-1 or UR4-8, the tri-color LEDs may used to see the status of doors (secure, authorized unlock, forced •... -
Page 6: Product Specifications
1.0 INTRODUCTION Product Specifications TCC: TCC: Description: Description: Slope Front Desktop Console Slope Front Desktop Console Color: Color: Black Housing, Beige Top Black Housing, Beige Top 10-1/4”W x 4-3/4”H x 9-5/8"D 10-1/4”W x 4-3/4”H x 9-5/8"D Dimensions: Dimensions: Capacity Capacity 12 stations maximum when using 2 switch panels. -
Page 7: Rocker Switch Types (All Outputs Are Dry Outputs)
1.0 INTRODUCTION Rocker Switch Types (All outputs are dry outputs Type “A” - Momentary Switches (2-position) Closed Open Open Closed Held Terminal Configuration Normal Activated (Standby) (While Held) Type “B” - Momentary Switches (2-position) Closed Open Closed Open Latched Terminal Configuration Normal Activated... -
Page 8: Switch Panel
1.0 INTRODUCTION Switch Panel Configurations Note(s): Panel configurations are only available in 4 or 8 switches. All the switches on a panel are the same type (A, B, C or D). Unless otherwise specified, switches are numbered in sequential order. The first, top-left switch is marked “1”, and then they increase sequentially along the top row. -
Page 9: Connector Boards
CONSOLE HARDWARE DESCRIPTION Input/Output Connector Boards All RCC and TCC Consoles are at the factory. All field wiring will be terminated on the (I/O) board . One I/O Board is required for every four switches. The numbers on the I/O boards numbers the switch Reset... - Page 10 2.0 CONSOLE HARDWARE DESCRIPTION Rocker Switch Outputs (x4) Inputs Key lock or Reset Button Switch Power Input Fig 4. Input/Output Board Terminals Buzzer (*L4E or EA pannels only) Fig 5. Input/Output Board Connectors I/O Board Connectors Function J1 – J4 Panel Rocker Switches 1-4, respectively J5 &...
-
Page 11: Rocker Switch Outputs
CONSOLE HARDWARE DESCRIPTION Rocker Switch Outputs Each rocker switch output is labeled according to its corresponding rocker switch cap number. The 3-terminal output is marked UP, COM and DN. The electrical configuration of the output is dependent on the panel model type (A, B, C, or D). Refer to Page 5 for all terminal configurations. -
Page 12: Direct Connection To Locking Devices With 2-State Status Led
3.0 CONSOLE WIRING EXAMPLES Wiring examples are meant to serve as a reference and may not cover the scope of your exact application. Direct Connection to Locking Devices with 2-State Status LED (Door Open / Door Closed) (for AL or BL Series Panels) NOTE: The rocker switch rating must be taken into consideration when connecting locking devices directly through the switch. -
Page 13: Direct Connection To Locking Devices With 3-State Status Led
CONSOLE WIRING EXAMPLES Direct Connection to Locking Devices with 3-State Status LED (Door Secure / Door Unsecure / Authorized Open) (for AL or BL Series Panels NOTE: The rocker switch rating must be taken into consideration when connecting locking devices directly through the switch. It is recommended to use example 3.3 for locks drawing more than 1 Amp. -
Page 14: Connecting Locking Devices Via Ur-1 Universal Relay
3.0 CONSOLE WIRING EXAMPLES Connecting Locking Devices via UR-1 Universal Relay Module (applicable to all panel models) Connecting the console to door locking devices via the UR-1 allows you to isolate lock power, add the capability of timed operation, as well as the ability to report a forced door condition. To operate the door, connect the Normally Open switch to the Trigger A input on the module, then connect the locking device to the access Relay A per the wiring diagram. -
Page 15: Procedure
Follow the wiring diagram appropriately for fail-safe or fail-secure locks. Be careful to observe lock voltage polarity. NOTE: All low voltage lock wiring shall be 18-gauge minimum (wire gauge shall be determined by the SDC wire gauge chart or another voltage drop too). - Page 16 Check wiring at door for switch continuity and/or voltage. • If connected to doors via external relay modules, check troubleshooting procedures in the appropriate manual. • Contact SDC technical support for further help or application assistance. P:\INST-INS TRUCTIONS\CO NTROL CONSOLES \INST-TCC/RCC REV - 10/20...
Need help?
Do you have a question about the TCC Series and is the answer not in the manual?
Questions and answers