Before You Begin Function To ensure safe operation, read the following instructions in their Spring USA’s MultiSurface Hidden Induction Range is a warming unit for entirety. product holding. The range has been designed specifically to keep food warm. Food must be at or above serving temperature before being placed on the range.
Installation 3. Install the (8) M5 x 4 5mm leveling screws provided. Inspect all parts of the induction range prior to installation and use. If the unit is damaged, do not use. Contact a supplier for a replacement. Ensure dedicated power is available at the installed location. The induction range must be mounted in a heat resistant countertop (2”...
SmartStone™ is Spring USA’s proprietary stone designed specifically to cracking or staining of the surface. When noted, the SurfaceGuard work together with Spring USA vessels for maximum performance and should always be in place between the approved vessel and precision. SmartStone™ is the preferred surface for use with the approved surface for further protection.
Maintenance 4. Press the desired setting button. See the below chart for temperature ranges. Because the induction range is hidden, it is not necessary to remove it from beneath the countertop and clean daily. Periodically check for any obstruction to airflow. If cleaning the induction range is deemed necessary, first ensure the unit has been turned off, unplugged from the power source and has cooled before handling.
Range. Attempting to service the unit on your own, or through an unauthorized repair facility, automatically voids your warranty. Contact our Service Department at 630-527-8600. For service forms, visit the Spring USA website. Warranty For limited warranty information, visit the Spring USA website. This page intentionally left blank.
Need help?
Do you have a question about the MAX Induction SM-651SS and is the answer not in the manual?
Questions and answers