Advertisement
ASSEMBLY
STEP 1:
Remove plate on rear of mower as shown.
Redrill top two holes for a 3/8"-16 hex bolt
to mount Mount Plate onto mower frame.
STEP 2:
Use (2) 3/8"-16 x 2" (#K1208) , and (2)
3/8"-16 flange nuts (#K1215) to secure
Mount Plate (A) to mower frame. Use (2)
1" spacers (#S0138) between Mount
Plate (A) and mower frame. Place (1)
Bracket (B) on each side of Mount Plate
(A). Use (1) 3/8"-16 x 3/4" hex bolt (#K1190)
and (1) 3/8"-16 flange nut (#K1215) to
mount each bracket. Use existing bolts
from mower frame to mount Bracket (B)
to mower. Use figure 1-1 to place bolts.
4
MODEL 37610701 - 04
FIG. 1-1
DESIGNATION OF
HOLES ON THE
MOUNT PLATE
B
A
MOWER
FRAME
HOLES TO
MOUNT TO
TRACTOR
PeCo
Advertisement
