Storite Rite 1 Assembly Instructions Manual

Storite Rite 1 Assembly Instructions Manual

Sloping roof shed 1530mm wide x 780mm depth x 1830 - 1770mm high

Advertisement

Quick Links

YEAR
WARRANTY
Call 0800 ENZEMBLE
for an installer near you.
If you choose to vary from these instructions
your warranty will be impaired.
rite
SLOPING ROOF SHED
1530mm wide x 780mm depth x 1830 - 1770mm high
ASSEMBLY
INSTRUCTIONS
You should have one package:
• 1 cardboard package with the sheeting
Tools required:
Battery or electric drill
3.3mm (1/8th inch) drill bit
Screwdriver and riveter
Tape measure
Ladder
Non-slip gloves, good shoes and goggles
A set of helping hands
Some parts have sharp edges and should be
handled very carefully. We recommend the use of
protective gloves and footwear when assembling.
DO NOT attempt to erect this shed in windy weather.
All dimensions are approximate.
If you need advice, call us FREE on 0800 807
433 or email us at info@storitesheds.co.nz
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Rite 1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Storite Rite 1

  • Page 1 rite SLOPING ROOF SHED 1530mm wide x 780mm depth x 1830 - 1770mm high ASSEMBLY INSTRUCTIONS You should have one package: • 1 cardboard package with the sheeting Tools required: • Battery or electric drill • 3.3mm (1/8th inch) drill bit •...
  • Page 2: Components Checklist

    • Extra internal fixings are strongly outside. recommended in high wind areas. If you choose to vary from these instructions If you need advice, call us FREE on 0800 807 433 your warranty will be impaired. or email us at info@storite.co.nz...
  • Page 3: Door Assembly

    , raising the door about 4mm off the "Z" door jamb. Narrow pan 30mm If you choose to vary from these instructions If you need advice, call us FREE on 0800 807 433 your warranty will be impaired. or email us at info@storite.co.nz...
  • Page 4: Front Wall

    (except the roof channels). If you choose to vary from these instructions If you need advice, call us FREE on 0800 807 433 your warranty will be impaired. or email us at info@storite.co.nz...
  • Page 5 Repeat for other side wall with opposite slope. 10-15mm at Trim or fold corner bottoms. If you choose to vary from these instructions If you need advice, call us FREE on 0800 807 433 your warranty will be impaired. or email us at info@storite.co.nz...
  • Page 6: Installation

    Phone 0800 80 SHED for free advice. See page 6 hammer. for more details. If you choose to vary from these instructions If you need advice, call us FREE on 0800 807 433 your warranty will be impaired. or email us at info@storite.co.nz...
  • Page 7 For poured floors with a recess around the perimeter. Flat floor clamps For existing concrete only. Internal dimensions for the RITE 1: Water can seep 1485mm x 735mm underneath. Storite kitset wooden floors Every shed must have a floor shed...
  • Page 8: Warranty

    We would like your feedback Please email your comments to feedback@storite.co.nz or fax us on 06 878 5758. Customer satisfaction is our top priority and we are always on the look out for ways in which we could do better.

Table of Contents