Makita GA5011 Technical Information page 6

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3A. Large Spiral Bevel Gear, Spindle, Ball bearing 6202DDW
(GA5011, GA6011 without SJS)
ASSEMBLY
Bearing box section is assembled as illustrated in Figs. 14 and 15.
And assemble it to Gear housing. Refer to Figs. 2 and 3.
Fig. 14
Bearing retainer 39
Ball bearing
6202DDW
Use new Ball bearing
6202DDW.
Fig. 15
Ball bearing
696DDW
After securing the large Spiral bevel gear with Ring spring 11,
assemble Ball bearing 696ZZ to Spindle.
Flat
washer 15
Bearing Box
Assemble Spindle to
Bearing box, by pressing
with Arbor press.
Ring spring 11
Large spiral
bevel gear
Spindle
Set Bearing box onto 1R036 for inserting
Spindle into the center hole of 1R036.
And putting 1R030 onto Large spiral bevel
gear, assemble Large spiral bevel gear to Spindle
by pressing with Arbor press.
Note: New Ring spring 11 has to be used,
if it is deformed in the Step of Fig. 12.
P 6 / 11
1R030
1R036