Makita GA5011 Technical Information page 11

C
ircuit diagram
Fig. D-1
Color index of lead wires' sheath
Black
White
Power supply
cord
W
iring diagram
Fig. D-2
Wiring in Handle Set (L)
Fix Field lead wire (black) and that of (white) with
Lead wire holder, while tightening them in this area.
Noise suppressor
Handle set (L)
Fig. D-4
Handle set (L)
Do not use these
Lead wire holders.
B
Switch
A
Lead wire holder
Insulated terminal
Switch
Switch
Wiring around Switch
Switch
Connect Field lead wire (black) and Noise Suppressor's Lead
wire (white) to Switch terminal No.4 as illustrated above.
Lead Wire A: Blue for some countries, instead of white
Lead Wire B: Brown for some Countries, instead of black
Noise suppressor is not used for
Noise suppressor
some countries.
Fig. D-3
Wiring of Motor housing
Pull out Field lead wires from the
opening of Makita logo side.
Makita logo
Fix Field lead wire (white), and
Connecting lead wire (white)
between Switch and Noise
suppressor with these Lead wire
holders before assembling Switch.
Field lead wire (black)
Noise suppressor's
lead wire (white)
P 11 / 11
Field