Service Precautions; Notes On Soldering; Notes On Replacing Parts; Service Notice - Pioneer VSX-5231 Service Manual

1

1. SERVICE PRECAUTIONS

1.1 NOTES ON SOLDERING

A
• For environmental protection, lead-free solder is used on the printed circuit boards mounted in this unit.
Be sure to use lead-free solder and a soldering iron that can meet specifications for use with lead-free solders for repairs
accompanied by reworking of soldering.
• Compared with conventional eutectic solders, lead-free solders have higher melting points, by approximately 40 ºC.
Therefore, for lead-free soldering, the tip temperature of a soldering iron must be set to around 373 ºC in general, although
the temperature depends on the heat capacity of the PC board on which reworking is required and the weight of the tip of
the soldering iron.
Do NOT use a soldering iron whose tip temperature cannot be controlled.
Compared with eutectic solders, lead-free solders have higher bond strengths but slower wetting times and higher melting
B
temperatures (hard to melt/easy to harden).
The following lead-free solders are available as service parts:
• Parts numbers of lead-free solder:
GYP1006 1.0 in dia.
GYP1007 0.6 in dia.
GYP1008 0.3 in dia.
C

1.2 NOTES ON REPLACING PARTS

The part listed below is difficult to replace as a discrete component part.
When the part listed in the table is defective, replace whole Assy.
Assy Name
D
D-MAIN Assy
E

1.3 SERVICE NOTICE

• Discharging
For more detail, please refer to "7. DISASSEMBLY - 1. Discharging".
F
4
1
Downloaded from www.Manualslib.com
2
Ref No. Function
IC2007 5V SW Power Supply IC
IC2012 INTERFACE IC
IC2013 D-MAIN 1.2 V Power Supply IC
IC2015 D-MAIN 1.8 V Power Supply IC
IC2016 DSP IC
IC2017 Low Dropout Power Supply IC
IC2020 APPLE AUTHENTICATION IC
IC2021 USB 5 V Power Supply IC
VSX-523-K
2
manuals search engine
3
Parts that is Difficult to Replace
Part No.
——————
——————
——————
——————
——————
——————
——————
——————
3
4
Remarks
IC with heat-pad
IC with heat-pad
IC with heat-pad
IC with heat-pad
IC with heat-pad
IC with heat-pad
IC with heat-pad
IC with heat-pad
4