tws XO-9852 Quick Start Manual

TWS Earphones and Charging Case
XO-9852
P329.01X Liberty TWS earbuds in charging case
What's include?
-
TWS earbuds with charging case x 1
-
Micro USB charging cable x 1
-
Interchangeable ear tips x 2 pairs

Charging the earbuds:

Put the earbuds into the charging case to charge the earbuds. Make sure the earbuds are
securelyplaced into the case. The LED indicators on earbuds will light up in red when the
earbuds are being charged. The LED indicators on earbuds will go out when the earbuds
are fully charged.
(When the earbuds are being charged, the LED indicator on charging case will flash in
blue.)

Charging the charging case:

Use the provided micro USB cable to connect to an AC adapter or computer to charge the
charging case. The LED indicators on charging case will flash in blue when the charging
caseis being charged. The LED indicators on charging casestay solid blue when the
charging caseis fully charged.

How to use?

When the earbuds are in the charging box, just take them out and the 2 earbuds will
power on automatically.
(When the earbuds are not in the charging box, press and hold both power buttons
simultaneously for 2-3 seconds to power on the earbuds.)
When the earbuds are powered on, the LED indicators will alternately flash red and blue.
After 2-3 seconds, the LED indicators will flash blue slowly, which means both earbuds
are paired with each other successfully.
(If both earbuds do not pair together after 10 seconds, tap the power button on either
earphone to force them to pair.)
Check Bluetooth setting menu on your smart devices and make sure that Bluetooth is
turned ON. Connect with the device listed as "Liberty wireless earbuds".