Subscribe to Our Youtube Channel
Related Manuals for Skullcandy Shrapnel
Summary of Contents for Skullcandy Shrapnel
- Page 1 ShrapnelQuick Guide Quick Start, would like to show visually for first page: Power On Power Off Pairing Battery Life ...
- Page 2 ‐ Shrapnel User Guide Technical Draft Main Speaker Controls Power On Long press and hold the Power Button. Wait (for up to 3 seconds) for the LED lightto flash magentaand the power on tone to be played. Do not press any other buttons during this time. When Shrapnel is on, the speaker will look to connect to up to 2 devices in the paired device list. If no paired devices are available for connection, the speaker will enter a NOT connected state and the LED will flashred2x every 3 seconds. Power Off Long press and hold the power button at any time while the Shrapnel is ON. As the speaker powers off, it will play the power down tone and the LED will turn magenta. It is recommended to disconnect all Bluetooth streaming devices before powering off. Enter Pairing Mode When the speaker is ON, press and hold the round MFB (main function button) for 5 seconds. You will hear the voice notification, “pairing”, and the LED will alternatered and blue when pairing mode is entered. When a device is successfully paired, the LED will flashred3 times. Connect to device When the speaker is not connected to a device and not in pairing mode, short press the round MFB button to attempt to connect to a device from the list of paired devices.Ensure the device Bluetooth is ON. When the device is connected, you will hear the voice notification “connected”, and the indicator LED will flashblue once every 3 seconds. Unlock the #STAYLOUD Sound Profile While your music is streaming, press and hold the volume + and – buttons together (for up to 3 seconds) to shift gears between the different Skullcandy tuned sound profiles. The #STAYLOUD sound profile boosts the volume of the speaker and is ideal for outdoor use and your extra loud environments, whereas the standard profile has a more balanced sound signature that is best for indoor use and your everyday grind. Clearing the Pairing List To clear the list of paired devices from the speaker, push and hold the + and round MFB simultaneously for 3 seconds while the power is ON. This will reset the speaker to default pairing mode the next time it is powered on. Devices will need to be paired again once this has been done even if previously paired. Battery Status Check When the battery is low it will play the voice notification, “please charge device”. Charging In any state, you may plug in the included micro USB to USB power cable to begin charging the Shrapnel. The LED will flash magenta 2x every 3 seconds to confirm that it is charging. ...
- Page 3 Music Controls Start Music Playback When the speaker is connected to the device but not streaming music, short press the roundMFBto start streaming. When the device is streaming, the frontLED will be off. Pause Music Playback When the speaker is streaming music, short press the round MFBto pause the playback. Volume Up When the speaker is ON and not in pairing mode, short press the + button to increase the volume level. Volume Down When the speaker is ON and not in pairing mode, short press the ‐ button to decrease the volume level. Track Forward When the speaker is connected to a device, long press the+button to track forward. Track backward When the speaker is connected to a device, long press the‐buttonto track backward. 3.5mm Wired Audio Playback When the device is not streaming via Bluetooth, plug in the included3.5mm cableinto the bottomAUX jack. To play music through the wired connectionthe source device must be used to control playback. Track controls on the speaker will be disabled. Volume controls will function normally. Note that Bluetooth streaming takes priority over wired audio playback. Phone Call/Receive Controls On‐Board Mic and Volume function When the Bluetooth is enabled, the on‐board Mic and the volume + ‐ buttons will be activated for full call functionality. Answer and Hang Up Call When streaming BT, an incoming call can be answered with a short press of the round MFB. Once connected, the call can be hung up with another single button press of the round MFB. Reject incoming call Long press (for up to 3 seconds) the round center button and the call will be rejected. While call is active: Put on hold When the call is active, long press (for up to 3 seconds) the round MFB. Once on hold, another long press of the round MFB will release the call on hold. You are also able to toggle between two calls with the same long press of the round center button if you have one on hold. If you would like to end the call on hold or end the active call and return to the call on hold, you must short press the round MFB. ...
- Page 4 Short press the volume + to increase call volume, and short press the volume – to decrease the call volume. Incoming call While the active call is connected, short press the round MFB to end the current call and answer the 2 incoming call. If you would like to put the active call on hold and answer the 2 incoming call, long press (up to 3 seconds) the round MFB. To then return to the call on hold, long press the round MFB. Other Device Features Auto Power Off If the device is idle for 5 minutes, it will turn itself off while the switch is in the on state. To turn the speaker back ON,press and hold the power button. Auto LED off The LED will be powered off after 4.5 minutes for every state. This feature is to conserve battery life. For example, if the BT speaker is at music streaming state for 4.5 minutes, the LED will auto off. The timer will reset whenever there is a change in state. One exception is that the LED indication for pairing mode will remain active during pairing mode as pairing mode itself has a timeout. Multipoint Support The speaker supports connecting to up to TWO audio source devices at the same time. At any one time, only one device's audio will be heard through the speaker. When using the play/pause button on the speaker, the play/pause command will always go to the last streaming device. To switch the playback device, the user has to pause/stop the playback on the currently streaming device and must start the playback from the other device directly. Once the playback is established with the new device the use of play/pause command will function for that device. Expected Charging Time When using the provided charger, a fully drained Shrapnel battery will take approximately 2 hours to fully re‐ charge to 100% battery life. Trouble Shooting There is choppy audio after connecting to the speaker, or will not connect… When multipoint is enabled, the Bluetooth chip will be searching for a 2 paired device while still streaming music from the connected device. This causes a short section of choppy audio immediately after connection. It should resolve and play normally after approximately 30 seconds. Also, the following will resolve the issue immediately: ‐ Restore defaults: Hold Volume + and the round MFB for 5 seconds to reset the paired device list and then pair again. ...
- Page 5 ‐ If restoring defaults does not solve the problem, remove Shrapnel from Device: Go in to pairing settings on the device and remove or ‘forget’ Shrapnel and then pair again. Wired audio will not play… If wired audio will not play, make sure that no device is streaming to the speaker. Disconnect paired devices from the speaker. Sound Set‐Up Shrapnel on bottom “feet” When Shrapnel is on the edge of a room or facing an entire group of people, set it on its bottom surface, so that the speakers are facing the entire group. Shrapnel on back When Shrapnel will be playing in the middle of a group (i.e. on a table, by a campfire, etc.), place Shrapnel on its back face so that the speakers are pointing upward. This creates a uniform 360 degree sound field. ...
- Page 6 – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Click Here To Read More... Skullcandy Shrapnel User Manual...
Need help?
Do you have a question about the Shrapnel and is the answer not in the manual?
Questions and answers