Advertisement
4. OPERATION
WARNING: For timing belt replacement always follow a recognised workshop manual; for further information always refer to the relevant
manufacturers recommendations.
4.1. This tool is designed to assist with the operation when replacing the timing belt on Subaru 2.0 and 2.5 litre engines DOHC including Turbo
engines, where hexagonal bolts are used to secure the camshaft Sprockets.
4.2. Once fitted, the tool locks the inlet and exhaust camshafts on the left hand bank and prevents them from turning; this is a great time saving
tool and makes changing the camshaft drive belt an easier operation.
4.3. Once all the timing marks have been aligned, the camshaft locking tool can be fitted.
4.4. With the locking bolts loosened slightly, fit the camshaft locking tool so the hexagon fits over the camshaft sprocket fixing bolts. The tool
should be parallel to the camshaft pulleys.(fig.1). Note: depending upon the camshaft pulley type the spacer provided may, or may not be
required.
4.5. Once correctly in position, tighten the locking tool securing bolts.
4.6. Ensure that the hexagon locking sections are held with a suitable spanner when tightening the locking bolts.
4.7.
Once this operation is completed tighten the securing bolts on the camshaft locking tool. The camshaft positions are now locked and will
not move when the camshaft drive belt is removed.
4.8.
Once the timing belt has been replaced and all timing marks are checked to ensure the timing is correct, the camshaft locking tool can be
removed.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable dispose of it according to local regulations.
NOTE: It is our policy to improve products continually and as such we reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
fig.1
Environmental Protection
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
www.sealey.co.uk
01284 757500
sales@sealey.co.uk
01284 703534
VSE5066
Issue: 1 - 16/05/16
Advertisement
