HAPRO Luxura Sound Around Owner's Manual page 36

ENGLISH
Software settings
Note: If you have bought this product together with your tanning unit, you don't
have to change the software settings .
The "SoundAround" system has been supplied with default settings which are usually more
than adequate . However, it is possible to change several relevant settings, such as:
1 . Number of music channels
2 . Amplifier input signal
3 . Starting volume
4 . High tones
The following description clarifies the ways in which the various settings can be changed .
Please take note that these are the settings that are performed in a general program menu .
These settings may only be adjusted by a Hapro dealer .
36
5 .
6 .
7 .
8 .
To enter the settings menu, simultaneously press the "Qsens"
and the "Stop" button for 10 seconds .
The display will show a 1 and a 0 . The 1 is the setting number
and the 0 the relevant setting .
you can scroll to the various setting numbers by using the
"increase face cooling" and "decrease face cooling" buttons .
you can set the various settings by pressing the "increase body
cooling" and "decrease body cooling" buttons .
Press the "Start" button to exit the settings menu and save the
made changes or press the "Stop" button to exit the settings
menu and discard the made changes .
To listen to the effect while setting the various setting numbers,
you can use the "increase volume" , "decrease volume" and
"channel selection" buttons .
Low tones / bass
SmartVoice
SmartVoice language choice
MP3 input