Chilli Penguin Chilli Billie Installation And Operating Manual page 30

HOT SURFACES
The surfaces of the Chilli Billie is designed to get hot during operation. It is
recommended to use a fireguard in the presence of children or vulnerable adults, or if
combustible materials could make contact with the stove surface (manufactured to BS
8423).
CO alarm
It is a legal requirement to install a Carbon Monoxide and we strongly recommend
a smoke alarm as well. A CO alarm should be CE marked against requirements
BS EN 50291-2. Should be fixed within distance of 1-3m from the stove.
FUEL
Only burn seasoned wood. DO NOT burn house coal or treat your stove as an
incinerator for gereral rubbish. DO NOT use any liquid fuels.
CHIMNEY FIRE
In the event of a chimney fire, close all stove doors and air vents. Evacuate the house
and phone the fire service.
PRE-LIGHTING CHECKS
• Check that the door closes correctly and the rope seals and glass are intact
• Check that the throat plate is installed correctly
• Check that all labels and packaging have been removed (including from the flue system)
• Check that any access points in the flue are closed off e.g. sweeping access
When you look at your penguin...smile
because it's looking back at you
Spares are available through your local Chilli stockist or
our online shop. There are diagrams online to help you
identify the correct parts and advice about how to fit:
www.chillipenguin.co.uk/FAQ/looking-after-your-penguin
Page 28 of 43