Filling The Container - Ryobi RY18FGA Original Instructions Manual

■ Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■ Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
■ Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
■ Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
■ Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
■ When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
■ Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
■ Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or
risk of injury.
■ Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130°C may cause explosion.
■ Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
SERVICE
■ Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that safety of the power tool is maintained.
■ Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
FOGGER SAFETY WARNINGS
■ To reduce the risk of fire or explosion, do not use the
product with flammable liquids, such as gasoline or
other chemicals with a flashpoint below 55°C.
■ Operate the product only in temperatures between 0°C
and 40°C.
2 | English
■ Store the product in a location where the ambient
temperature is between 0°C and 40°C.
■ Be aware of any hazard presented by the chemical
solutions. Always follow the chemical manufacturer's
instructions on usage, handling, and storage.
■ Chemicals should be stored out of reach of children.
■ Refer to the chemical manufacturer's instructions to
check if the chemical is suitable for indoor or outdoor
use.
■ Do not use the product with any material where the
hazard is not known.
■ Do not use caustic (alkali) self-heating or corrosive
(acid) liquids with the product. These can corrode metal
parts or weaken the tank and hose.
■ Always check for and repair leaks before using the
product.
■ To help reduce the risk of injury, wear personal
protective equipment, such as face mask, gloves,
safety footwear, and upper-body protection, when
doing the following:
● operating the product
● handling chemicals
● performing maintenance
■ Never allow children, persons with reduced physical,
sensory, or mental capabilities or lack of experience
and knowledge, or people who are unfamiliar with these
instructions to use the product.
■ Do not smoke, eat, or drink while using the product.
■ The spray area must be well-ventilated.
■ Keep the area clear of all bystanders, children, and pets
while operating the product.
■ Do not let chemicals come in contact with eyes and
skin. If chemicals come in contact with the skin, wash
immediately with soap and plenty of water. If chemicals
come in contact with the eyes, wash immediately with
clean water. If irritation persists, immediately seek
medical help.
■ Immediately turn off the product and remove the battery
pack in the event of accident or breakdown. Do not
operate the product again until it has been fully checked
by an authorised service centre.
■ Follow the safety instructions in this manual for mixing,
filling, application, emptying, cleaning, servicing and
transporting the product to avoid contamination of the
environment.
MIXING THE SOLUTION
■ Mix the chemicals strictly in accordance with the
manufacturer's instructions. Incorrect mixtures may
produce toxic fumes or explosive solutions.
■ Never use undiluted liquid plant control chemicals.
■ Prepare the solution and fill the container outdoors or in
well-ventilated areas only.
■ Prepare only sufficient solution for the job in hand so
that nothing is left over.
■ Do not mix different chemicals unless such mixture is
approved by the manufacturer.

FILLING THE CONTAINER

■ Make sure that the container is completely emptied and
cleaned before a different chemical is filled in.