Audiovox TERK VR-1 Owner's Manual

Connecting the VR-1 from the
Audio Outputs of Your TV
1. Use a set of red and white audio connection cables
to connect the audio output of your TV to the INPUT
of the VR-1.
2. Use another set of red and white connection cables
(not included) to connect the OUTPUT of the VR-1 to
the input of your stereo or home theater receiver.
3. Connect the A/C adapter to the DC input of the VR-1.
4. Plug the A/C adapter into a working electrical outlet.
IN OUT
L R L R
AUDIO
OUT
LEFT RIGHT
Note: You may need to enable the audio output feature of
your TV. Please check the owner's manual of your system to
determine how to do this.
4

Limited Warranty

Audiovox Corporation (Audiovox) warrants this product against defects in
materials or workmanship for one (1) year from the date of purchase. During
this period, this product will be replaced without charge. This warranty does
not cover any damage due to acts of nature, commercial use, accident,
misuse, abuse or negligence. This warranty is only valid in the USA.
Replacement as provided under this warranty is the exclusive remedy of the
consumer. Audiovox shall not be liable for any incidental or consequential
damages for breach of any express or implied warranty on this product, except
to the extent that limitations of this sort are prohibited by applicable law.
THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURCHASE EXCEPT TO THE EXTENT THAT IMPLIED
WARRANTIES OR EITHER SORT ARE REQUIRED BY APPLICABLE LAW, AND IN
SUCH CASE, EACH WARRANTY IS LIMITED IN DURATION TO THE ONE YEAR.
Stereo/Receiver
LEFT RIGHT
AUDIO SPEAKER SPEAKER
IN
LEFT RIGHT
For customer service and
technical information::1.800.290.6650
TERK and the TERK logo are registered trademarks of AUDIOVOX Corp.
VR-1
Owner's Manual
For Customer Service
Visit Our Website At
www.audiovox.com
Product Information, Photos,
FAQ's, Owner's Manuals VR-1
TV Volume Regulator
102P005A