Advertisement
Quick Links
Tajima TME, TMEF User Manual
Basics
Main buttons (on the bottom left)
DISPLAY: Change the information shown on the main screen.
REPEAT, STITCH,
ORIGIN: Return to the start position. Press ORIGIN, then SET. Make sure home position is
programmed.
SELECT: To change the color change sequence.
REPT: Repeat function.
T.CODE: To load a new design.
SET: To make a selection.
RESET: To cancel errors.
ERROR)
(N.SELECT, TAPE CODE,
Advertisement
Related Manuals for TAJIMA TME
Summary of Contents for TAJIMA TME
- Page 1 Tajima TME, TMEF User Manual Basics Main buttons (on the bottom left) DISPLAY: Change the information shown on the main screen. (N.SELECT, TAPE CODE, REPEAT, STITCH, ERROR) ORIGIN: Return to the start position. Press ORIGIN, then SET. Make sure home position is programmed.
- Page 2 Option buttons (top middle). COORD: To rotate the design. P and one blinking light is normal. Press STEP to change to 45 degree mode (two blinking lights). Press SET to make it stop blinking. A.CHNG: To switch between automatic and manual color change. A.STRT: To turn on automatic start after a color change.
- Page 3 Load a new design 1. Press TAPE CODE. 2. Press the 2 key and then press SET. 3. The blinking number is the first empty memory location for your new file. 4. Change this number, or leave it. Press the SET key when done. 5.
- Page 4 Erasing design in memory 1. Press MODE, then press 1, then press SET. 2. Press ERASE, then press SET. 3. The top right screen will activate, asking which number to delete. 4. Type in the design to erase with the number pad. 5.