Table of Contents
Advertisement
Quick Links
SPRITE 35 - II USER MANUAL
For product specifications and warranty
information visit – www.ilford.com
ILFORD and the ILFORD Logo are registered trademarks of
ILFORD Imaging Europe GmbH.
HOW TO LOAD FILM (STEP 1)
Press the latch (A) in the direction of the arrow
and open the camera back door (B). Lift the
camera rewind crank (C) and place a new roll
of film into the chamber.
HOW TO LOAD FILM (STEP 2)
Push the rewind crank (C) back into place. Pull
out the film canister and hook the 2nd hole
onto the film take-up spool (D). Slightly advance
the film by turning the film advance wheel (E).
HOW TO LOAD FILM (STEP 3)
Ensure the film lays flat against the centre of the
camera and close the back door.
HOW TO LOAD FILM (STEP 4)
Continue to advance the film by turning the film
advance wheel (E) until it stops. Press the shutter
button. Repeat the process one more time. The
film counter (F) will now show number '1', and
the camera is ready for taking pictures
Advertisement
Table of Contents
Related Manuals for Ilford SPRITE 35-II
Summary of Contents for Ilford SPRITE 35-II
- Page 1 SPRITE 35 - II USER MANUAL For product specifications and warranty information visit – www.ilford.com ILFORD and the ILFORD Logo are registered trademarks of ILFORD Imaging Europe GmbH. HOW TO LOAD FILM (STEP 1) Press the latch (A) in the direction of the arrow and open the camera back door (B).
- Page 2 HOW TO SHOOT PHOTOS For best results, stand at least 1 metre from the subject and take photos in sunny or partly sunny weather. When taking pictures, keep the sun at your back. HOW TO REWIND THE FILM (STEP 1) After all the pictures are taken press the rewind button (G) located at the bottom of the camera.
Need help?
Do you have a question about the SPRITE 35-II and is the answer not in the manual?
Questions and answers