Garmin inREACH SE Quick User Manual

USING THE inREACH TRACKER SE

Charge your inReach SE fully before using. Connect the device to an appropriate AC adaptor and plug it into an electrical
outlet or use a USB/micro-USB cable to charge from your computer. By pressing the Power/Enter button for three
seconds, the level of charge is displayed.
Antenna - Keep the satellite communicator antenna pointing up, with a clear view of the sky and not obstructed by parts
of your boat.
Status Light - This light flashes green when there is a new message waiting. It flashes red when there is something
important for you to see, like low power or a sending message delay.
Micro-USB Port - Lift the micro-USB protective cover to access the micro-USB port beneath. Use this port for charging
and for updates when notified.
Power/Enter - Press and hold for three seconds to power the inReach SE on. When on, press to select highlighted
objects or hold to access keyboard shortcuts when sending messages.
Directional Pad - Press arrows to highlight a section on the screen or hold to access keyboard shortcuts when sending
messages.
Quit/Preset Messages Shortcut - Press to back out of pages or operations. Press and hold to access the inReach
Messages shortcut.
SOS Button Lock - Slide the SOS button lock to the left to unlock the SOS button in an emergency
SOS Button - Press and hold the SOS button for three seconds to send a distress message to emergency response. If you
inadvertently activate SOS, press and hold the SOS button for five seconds while in SOS to send a Cancel SOS message to
emergency response.